wel
c
ome
c
ontent
s
inst
all
ation
op
era
tion
r
t
er
in
orma
tion
6
From
USB port
From primary video
output port
Connections at the local module
1 Where possible ensure that power is disconnected from the computer
system to be connected.
3 Use the supplied USB cable to
link the USB socket of the local
module to a vacant USB socket
on the computer.
2 Use the supplied video lead to
link the video input socket of
the local module to the video
output port of the computer.
[MS2 variant only] Optionally
attach a second video input to
the upper video in socket on
the MS2 local module.
From primary video
output port
From secondary video
output port
Note: Do not use USB cables longer than 3 metres to
connect the local module to the computer.
4 Optionally connect an audio link
from the computer’s speaker port
to the audio input port on the local
module.
From audio port
To local
speakers
5 Optionally connect local speakers to the audio output port on the local
module.
Important
The X-USBPRO can be used with other USB hubs in the system, but please
note that due to power constraints, the local unit should not be connected
to the downstream port of a bus-powered USB hub. Additionally,
X-USBPRO-MS2 local units must always be powered using their supplied
power adapter. Please see page 8 for details.
