42
8.
Good maintenance of your AddBike
Your AddBike requires a minimum of maintenance and regular servicing.
A.
Periodical maintenance
On the AddBike, check regularly and in accordance with the frequency of use (advice: once a
month):
The correct tightening of the following points:
o
Rear screws of the tilting wheels system. As system is symmetrical, remember to check
each side
(Cf. Figure 49)
;
o
The four screws at the end of the seat and
(Cf. Figure 49)
;
o
The bolt holding the fixing plaque
(Cf. Figure 49)
;
o
The screws holding the distributor of the brake cables (
Cf. Figure 51)
;
o
The screws holding the brake calipers on their brackets
(Cf. Figure 51)
;
o
The adjustment of the disc and of the system which allows to lock the tilting wheels
system
(Cf. Figure 51)
;
o
The screws on the mudguards (
Cf. Figure 51);
o
The worn state both of the brake pads and the pendulum’s lock system;
o
The condition of the brake cables and of the pendulum’s lock system;
o
The proper functioning condition of the suspension and lock system of the pendulum;
o
The condition of the mudguards, particularly that their supports are not twisted (
Cf.
Figure 56)
;
o
The presence of reflectors on both wheels of the AddBike.
Figure 48 - Seat screws and important check points
Rear mounting
of the
pendulum
Support bolts