40
Figure 47 - Rearview of the AddBike
•
Check the efficacy of the AddBike’s brakes by squeezing the brake lever of the AddBike;
•
Check the proper tightening of the brake handle (the handle should not move around the
handlebar). Check the brake balance
(Cf. Figure 47-a)
;
If braking is not balanced on both wheels, refer to section 8.B.
•
Check that the brake cables of the bike and of the AddBike brake handle are securely held
by the cable clamp
(Cf. Figure 47-b);
•
Check the tire pressure of the AddBike’s wheels. It must be between 3.5 and 4 bars
(Cf.
Figure 47-c)
;
•
Check the pressure of the rear wheel of your bike (refer to the instruction of your bike)
(Cf.
Figure 47-d)
;
•
Check that the flange system of the AddBike is correctly tightened on the fork: adjusting
the thumbwheel by hand
(Cf. Figure 48-e)
;
•
Check that the cable of the front brake and that of the tilting wheels’ handle pass between
the plaques of the fixing mechanism
(Cf. Figure 48-e);
•
Check that the rear flange and front flange are in full contact with the bike’s fork
(
Cf. Figure
48-e) ;
•
Check the correct tightening of the quick release axle on the fork dropouts.
(Cf. Figure 48-
f)
;
h
g
f
e