16
Now you will be able to mount the wheels.
Be very careful to mount the wheels on the correct side by referring to the
letter on the hub: L for Left and R for Right.
To do so:
•
Remove both the nut and the short spacer from each wheel axle, leaving the long spacer
and the wheel axle in place
(
Cf. Figure 5
) ;
•
Mount the wheels on the stub axles partially withdrawing the wheel axle while keeping the
long spacer, place the brake disc on the caliper, push the wheel axle and replace the short
spacer and nut
;
•
The elements must end up in the following order: wheel axle, wheel, long spacer, AddBike
stub axle, short spacer and nut
(
Cf. Figure 14
).
Figure 14 - Mounting the right wheel
•
Tighten the nuts on the wheels
’
axle using the open-end wrench size 19 and the socket-
end wrench size 19 hub side (external) in order to hold the screw head;