0%
25%
50%
75%
100%
LOOP LENGTH
GRAIN1
GRAIN2
GRAIN3
GRAIN4
GRAIN5
GRAIN6
...
GRAIN1: POS:10% / LENGTH:10%
GRAINX: POS <=> ABSOLUTE( INITIAL PO DEVIATION
GRAIN2: POS:10% + (5%*1)=15% | LENGTH:10% + (5%*1)=15%
GRAIN3: POS:10% + (5%*2)=20% | LENGTH:10% + (5%*2)=20%
GRAIN4: POS:10% + (5%*3)=25% | LENGTH:10% + (5%*3)=25%
GRAIN5: POS:10% + (5%*4)=30% | LENGTH:10% + (5%*4)=30%
GRAIN6: POS:10% + (5%*5)=35% | LENGTH:10% + (5%*5)=35%
GRAIN7: POS:10% + (5%*6)=40% | LENGTH:10% + (5%*6)=40%
0%
25%
50%
75%
100%
LOOP LENGTH
GRAIN1
GRAIN2
GRAIN3
GRAIN4
GRAIN5
GRAIN6
...
ST
ART
LENGTH
+INC
TOT
AL
LENGTH
WRAP
AROUND
100%*
30%
0%
0
ST
ART
POSITION
END POSITION
10%
40%
30%
60%
30
10%
70%
30%
90%
60
10%
100%
30%
120%
90
20%
50%
80%
10%
10%
30%
30%
150%
120
10%
60%
30%
180%
150
10%
90%
30%
210%
180
10%
20%
DEVIATION
ADDAC112 User’s Guide
page 9
ADDAC SYSTEM
SPREAD MODE
- [GRAIN PLAY HEAD] [GRAIN SIZE] [GRAIN INTERMITENCY]
In this mode Deviation sets an increment used to spread the corresponding function
over the grains index.
Grain 1 always keep the initial settings without any increment.
This mode will work best for longer loops 10 - 20 - 40 seconds or more.
The examples below will graphically exemplify this concept applied to [GRAIN PLAY
HEAD] and [GRAIN SIZE] (although not shown below [GRAIN INTERMITENCY] follows
the same principles):
Example A:
Position at 10% - Position Deviation at 5%
Length at 10% - Length Deviation at 5%
Example B:
Position at 10% - Position Deviation at 0%
Length at 30% - Length Deviation at 30%
*Wrap around is a modulus operation
which, simply put, means no value can
be greater than 100% and if so it will
simply read the two lowest numbers,
ex: 110% = 10%
