ADDAC System ADDAC112 User Manual Download Page 19

Page: 19 / 43

GRANULAR ENGINE

ADDAC112 User’s Guide

ADDAC SYSTEM

GRAIN DIRECTION:

[GRAIN DIRECTIONS] Sets the probability of the Grain Play Direction (Forward/Reverse)

Full Left only plays in Reverse, Full Right only plays Forward

GRAIN REPEAT:

Grain Repeat will determine if the sample plays with the exactly same setting as the

previously time played or if it calculates new parameters.

There are 2 modes selected by the [REPEAT MODE] switch

[REPEAT MODE] : [PROBABILITY / REPEAT X] there are 2 Modes for this feature

[PROBABILITY] sets the probability of repeat: 0 to 100%

[REPEAT X] repeats the grain for X times: 0 to 16

[PROB.% / REPEAT] sets the value for the Mode selected.

GRAIN VOLUME:

[VOLUME MIN] sets the Minimum Volume for the grains

[VOLUME DEVIATION] sets the ammount of deviation from the Minimum Volume.

GRAIN PANNING:

[GRAIN PANNING] sets the Panning Probability based on the behaviour pictured below

GRAIN PANNING BEHAVIOUR

LEFT

MONO

RIGHT

LEFT

MONO

FULL STEREO

HARD PAN

MONO

RIGHT

50%

100%

GRAIN PANNING POT POSITION: LEFT TO RIGHT

STEREO

FIELD

GRANULAR ENGINE

ADDAC112 User’s Guide

page 19

ADDAC SYSTEM

GRAIN DIRECTION:

[GRAIN DIRECTIONS] Sets the probability of the Grain Play Direction (Forward/Reverse)

Full Left only plays in Reverse, Full Right only plays Forward

GRAIN REPEAT:

Grain Repeat will determine if the sample plays with the exactly same setting as the

previously time played or if it calculates new parameters.

There are 2 modes selected by the [REPEAT MODE] switch

[REPEAT MODE] : [PROBABILITY / REPEAT X] there are 2 Modes for this feature

[PROBABILITY] sets the probability of repeat: 0 to 100%

[REPEAT X] repeats the grain for X times: 0 to 16

[PROB.% / REPEAT] sets the value for the Mode selected.

GRAIN VOLUME:

[VOLUME MIN] sets the Minimum Volume for the grains

[VOLUME DEVIATION] sets the ammount of deviation from the Minimum Volume.

GRAIN PANNING:

[GRAIN PANNING] sets the Panning Probability based on the behaviour pictured below

GRAIN PANNING BEHAVIOUR

LEFT

MONO

RIGHT

LEFT

MONO

FULL STEREO

HARD PAN

MONO

RIGHT

50%

100%

GRAIN PANNING POT POSITION: LEFT TO RIGHT

RANDOM RANGE

STEREO

FIELD

GRAIN PITCH:

[GRAIN PITCH] setting for the Grains Pitch: from -2 to +3 octaves

Summary of Contents for ADDAC112












































Search results

Summary of Contents for ADDAC112

Reviews:

Brands by name

Popular brands

ADDAC System ADDAC112, User Manual

Search results

Summary of Contents for ADDAC112

Reviews:

Brands by name

Popular brands