Edited
ADDAC112 User’s Guide
page 33
ADDAC SYSTEM
MENU
OPTIONS SUBMENU PAGE 6 - SPECIAL MODE
CLOCKED MODE:
Clocked Mode is one of the Looper Special Functions described in
page 14, to activate select ON.
PITCH DIRECTION CONTROL:
(New)
A special mode that allows the loop pitch control to also control the
looper playback direction somewhat resembling controlling a
turntable. From 0v to +2.5v it will play in reverse while pitching
down to an almost stop, from +2.5v to +5v will play forward pitching
up to the pitch chosen by the range selected: Narrow or Wide.
OFF - disabled
NARROW - At both ends pitch will be at zero
WIDE - At both ends pitch will be +12 semitones
In this mode the [FORWARD/REVERSE] button is not active instead it
monitors the playback direction.
Also there is no 1v/octave in this mode.
OPTIONS SUBMENU PAGE 7 - OTHER OPTIONS
SPECIAL FUNCTIONS:
(New)
Here special functions can be activated/deactivated so that they
won’t be mistakenly activated when using external inputs for the
same buttons while operating the encoder.
KILL ALL GRAINS - On/Off - [STOP] button
DUPLICATE - On/Off - [NEW REC] button
NORMALIZE - On/Off - [REC] button
PAUSE MODE:
TOGGLE - toggles between pause and play
MOMENTARY - pauses while button is pressed or GATE Input is On
TRIGGER SIZE:
The length of both trigger outputs in milliseconds
1 MS
10 MS
VOL IN PRESETS:
Applies to weather the Volume controls will be loaded from Presets
at every Preset change or if the Preset value is ignored and only
keeps track of the volume control knobs. Yes for loading the preset
value, No to ignore the preset value. Default value is NO.
DRY: YES/NO - Dry volume
LOOP: YES/NO - Loop volume
GRAINS: YES/NO - Grains volume
OVERDUB: YES/NO - Overdub Decay volume
FEEDBACK: YES/NO - Grains Feedback volume
