ADDAC112 User’s Guide
Edited
page 32
ADDAC SYSTEM
MENU
OPTIONS SUBMENU PAGE 4 - QUANTIZE OPTIONS
PITCH (ZERO) NOTCH:
(New)
If quantization is not engaged it can be hard to set the loop pitch
for perfect zero, engaging this function creates a small notch area
where it locks the pitch to perfect zero.
A pixel lights up on the screen when perfect zero pitch is set.
QUANTIZER:
BOTH - Applies quantization to both the Looper and the Grains
Engines
LOOPS ONLY - Only applies quantization to the Looper Engine
GRAINS ONLY - Only applies quantization to the Grains Engine
SCALES SET:
DEFAULT - Default quantization scales
CUSTOM - custom quantization scales
OPTIONS SUBMENU PAGE 5 - GRAINS OPTIONS
GRAIN DEVIATION MODE:
RANDOM / SPREAD - Changes the Deviation working method as
previously described in pages 7 through 9.
GRAIN PAN MODE:
FIXED / TRAVEL - Changes the Panning working method as previously
described in page 18.
GRAINS PITCH:
When either the [GRAIN PITCH] knob is moved or a new CV is
detected the grains pitch can be set to:
KEEP - each grain keeps the initial pitch until the end of it’s length
CHANGE - immediatelly changes the pitch of all grains at once
MAX GRAIN DELAY:
(New)
Sets the maximum time for the Grain Intermitency:
LOOP - Maximum time equals loop size
5 SEC - Maximum of 5 seconds
30 SEC - Maximum of 30 seconds
GRAIN SAMPLERATE:
(New)
Sets the Grain Samplerate, this will reduce the impact of the grain
engine on the CPU and allow more grains to be used.
FULL - Same as global Samplerate
HALF - Half of global Samplerate
QUARTER - Quarter of global Samplerate
