CHAPTER 3
Using terminal commands
29
(charge/discharge). To compute the actual value (in °C), the
following equation must be used:
•
days_uptime
in days; together with hr:min_uptime, it
represents the amount of time the device is up without a reset
or watchdog
•
hr:min_uptime
in hours:minutes format
•
rssi
as decimal; it is the value programmed with the
RSSI
command
•
pmp_low
and
pmp_high
are the programmed values with
the
PMP
command )
•
type
is used to represent the device type; the following
types are currently assigned:
— 0 for A730MD
— 1 for A720
— 2 for A730SD
— 3 for A720B
— 4 for A733
— 5 for A723
— 6 for A440
— 7 for A733GSM
— 8 for A731
— 9 for A732
— 10 for A740
— 11 for A740GSM
— 12 for A724
— 13 for A725
— 14 for A726
slot
and
samples
are the actual values programmed by
means of the
SLOT
command
•
po
is the power output of the device during the last frame
sent
•
err_level
is the error value; 0 means no error
R
EMARKS
GET
only.
R
EMOTE
Yes,
GET
only. The A725 can issue the command both remotely
and locally.
Temp
°
C
[ ]
internalTemp
400
⋅
255
------------------------------------------------- 68
–
=
