57
* “A” and “B” Factors NOT AVAILABLE at time of printing.
(A)
For
60 Hz
models
ONLY
.
(B)
For
50 Hz
models
ONLY
.
(C)
For models manufactured with optional Heat Reclaimer (HR)
ONLY
.
(D)
For models manufactured with a 7.5 HP blower (fan) motor.
(E)
For models manufactured with a 15 HP blower (fan) motor.
IMPORTANT:
The “A” and “B” Factors have been preprogrammed by the factory and
should not
be
changed in the field unless the Phase 6 OPL microprocessor controller (computer)
should fail and is being replaced.
THE REPLACEMENT
PHASE 6 OPL
MICROPROCESSOR CONTROLLER (COMPUTER)
MUST BE
REPROGRAMMED FOR THE SPECIFIC MODEL SHOWN IN THE “A” and
“B” FACTOR PARAMETERS CHART ON THE PREVIOUS PAGE (
page 56
).
The “A” “B” FACTOR LABEL IS LOCATED IN THE TOP CONTROL PANEL,
BEHIND THE PHASE 6 KEYBOARD (TOUCH PAD) - DISPLAY DOOR.