ADC PHASE 6 OPL, User Manual, Page: 38 / 68

35
REAdY
Preprogrammed Cycle Programming
Timed (Manual) Drying Cycle
0 0 0
PROGRM
D
(Program Mode)
To enter program mode, press the
"ENTER/START" Key once,
and immediately press the "0" Key
three (3) times within two (2)
seconds.
CYCLEd
MANUAL
AUTO
0
MANUAL
REV No REV
0 0
No REV REV
Select preprogrammed cycle to be changed (i.e., D).
Display will read "CYCLEd" for 1 second, and then
"AUTO" or "MANUAL". Cycle between automatic
and manual by pressing the "0" Key. If no change is
required press "ENTER/START" Key.
or
For Non-Reversing models press
"ENTER/START" Key.
Reversing Models:
Display will read "REVERSING" or
"NON-REVERSING" (single
direction rotation). If no change,
press "ENTER/START" Key.
If a change is necessary, press the
"0" Key, and then "ENTER/START"
Key.
Continued
Reversing
Models
or
0
AUTO
I
I
I
I
I
Non-Reversing
Models