ADC HIGAIN HXU-359, Manual

Page: 32 / 76

Provisioning 150-359-100-01, Revision 01
22 October 27, 2000 HXU-359 List 1
3 Choose the type of service (DS1). At this time only DS1 service is
supported.
4 Choose the type of line code (B8ZS or AMI).
5 Chose the line buildout for the DS1 port (131, 262, 393, 524, or 655 ft.)
6 Select the Virtual Tributary Group (VTG) 1 through 7 and the Virtual
Tributary Slot (VTS) 1 through 4. The cross-connection of tributaries
allows grooming of any of the DS1 channels to any available time-slot
location. Only available combinations are presented for selection. See
Figure 12 on page 19 for the default SONET tributary mapping.
Figure 13 on page 20 shows an M13 tributary mapping.
7 When finished configuring the port, reset the port to IS to place it in
service, then press
. You can then reconfigure another service in
the DS1 list, if desired.
ENTER