ADC HIGAIN HXU-359, Manual

Page: 31 / 76

150-359-100-01, Revision 01 Provisioning
HXU-359 List 1 October 27, 2000 21
C
ONFIGURING THE
DS1 P
ORTS
Table 5 on page 23 gives a summary of all the configuration options available
on the Services Configuration screen. Table 6 on page 23 describes the DS1
service modes.
Figure 14. Config Menu: DS1 Ports
To make configuration changes to a DS1 port, select the Config menu,
choose Services, and then perform the following tasks:
1 Select a DS1 service port, then press . The configuration bar at the
bottom of the screen should show your selection.
2 If the selected DS1 port is configured as IS or OFF (Mode field):
a Press the key to select the Mode field.
b Press the to select OOS-A.
Do not configure a service as OOS-M or OOS-A when it is
selected as a clock synchronization source.
Configuration bar
ENTER
TAB
SPACEBAR