F-Range Type L-850C Style 3 Inset Lights
Description
2006 ADB Airfield Solutions, Incorporated
96A0285D
Page 2-8
All rights reserved
Issued 04/13
Refer to Table 2-1 for required equipment that is supplied. Refer to
Table 2-2 for required equipment that is not supplied. Refer to the
Parts
section for part numbers.
Table 2-1 Required Equipment Supplied
Description Quantity
F-Range L-850C inset light, with lamps
1
Instruction manual
1 per order
Table 2-2 Required Equipment Not Supplied
Description Quantity
Torque wrench (0 to 200 in-lb) (0
22.6 Nt-M)
1
Alignment jig
1
Diamond-faced core drill, 13 in. (330 mm diameter)
1
Diamond-faced saw, 3/8 in. (9.525 mm) thick
1
Crimping tool
1
Small water suction pump
1
L-830 isolation transformer
1 or 2
Eyebolt, 3/8 in. (9.525 mm) diameter
2
Lifting rod, 16 in. (406 mm) long
1
Set of fiber brushes
1
Set of socket wrenches, 1/2 in. (12.7 mm) drive
1
Set of screwdrivers, one with 3/8 in. (9.525 mm)
minimum blade width
1
Silicone grease
As required
Joint sealing filler
As required
This subsection provides specifications for the F-Range L-850C inset
light fixtures.
105 W/6.6 A, MR16 lamp
Refer to Table 2-3.
Table 2-3 Required Isolation Transformers
Lamps Series
Circuit
Isolation
Transformer
Watts Amperes Hz
105 W unidirectional
6.6 A
One L-830-4
100
6.6/6.6
60
105 W unidirectional
20 A
One L-830-5
100
20/6.6
60
105 W bidirectional
(nonswitchable fixture)
6.6 A
One L-830
200
6.6/6.6
60
105 W bidirectional
(switchable fixture)
20 A
Two L-830s
100
20/6.6
60
6.
F-Range L-850C Light
Fixture: Required
Equipment
7.
Specifications
Lamp
Isolation Transformers
