AGLAS-C Remote Control Device
Modes of Operation of an AGLAS Remote
© ADB SAFEGATE All Rights Reserved
20
96A0481 Rev. A
2.4.5 Spreadsheet
It is recommended to maintain a list of installed remotes during installation, containing the AGLAS remote serial number and the
fixture number. This table will later on be used to build the ALCMS database. See Figure 12.
Figure 12:
Spreadsheet Example
2.4.5.1 A sample spreadsheet would contain:
•
Vault/substation name: the official name of the vault/substation were the circuit is powered.
•
Circuit name: the local name of the circuit (like TC3).
•
Circuit length: the approximate length of the circuit (in kilometres).
•
Total number of light fixtures: for reference only (not required).
•
Number of remotes: the total number of AGLAS remotes on this circuit.
•
Remote name: is automatically generated, but may be altered to serve your own needs. Max. 50 characters are allowed.
Remember that this will be your only lead to identify and locate lights and remotes out of the AGLAS system.
•
Serial number: is unique for every AGLAS remote and is required to fill-in.
•
Pit Name/Nr: for your own reference only.
•
Transfo type: (transformer type) only for your reference.
•
Light reference: unique identifier for the connected light fixture on the airfield
(see AutoCAD drawing).
•
Light Fixture Type: for your own reference only.
•
If the remote is a Dual type: reference must be filled in for Channel B also, even if the light fixture is the same as for Channel A
(one fixture with 2 lamps).
Underlined information is mandatory and the absolute minimum required data.
