User Manual of AData ATX H.264 DVR
Step 4: Alarm trigger record channel setup
You can select channels to record for each alarm input. In the sub menu, you can use
【
ENTER
】
or
【
EDIT
】
key to enable record channel. “
×
” means disable and “
9
means enable.
Note: In order to trigger the channel to record, in “Recording” menu, you must enable
recording and select record type as “Alarm” or other related type. Please refer to chapter 5.12.
Step 5: Schedule for alarm handle method
When there is external alarm happened in the schedule, DVR will response according to the
handle methods.
Step 6: Alarm handle method
You can select one or more handle method: “On Screen Warning”, “Audible Warning”,
“Upload to Center” and “Trigger Alarm Output”.
Description: If “On Screen Warning” is enabled, when there is external alarm happened and
DVR is in preview mode, DVR will pop-up the related camera. If you trigger more than one
camera, DVR will pop-up them one by one every 10 seconds. When the external alarm is
disappeared, DVR will restore preview mode.
Step 7: Save setup
“
In “Alarm in Handling” sub menu, press “Confirm” button and return
“Alarms” menu. In “Alarms” menu, press “Confirm” button to save the parameters.
Step 8: PTZ Linkage
Move “Active Frame” to “PTZ Linkage” button, press
【
ENTER
】
key to enter into “PTZ
Linkage” setup menu:
Select one camera, and then select one of following PTZ linkage:
AData Ltd.
Page
74
of
108
Copyright © 2006. All rights reserved.
Summary of Contents for ATX H-264
Page 1: ...AData ATX DVR User Manual ...
