Adata ATX H-264 User Manual Download Page 21

Page: 21 / 108

User Manual of AData ATX H.264 DVR

AData Ltd.

Page

108

Chapter4 Basic

Operation

Guide

4.1 Power

Note: Please make sure the power supply matches DVR and AC cable connected

correctly. Before switch DVR on, please connect one monitor with VOUT or VGA interface.

Otherwise, you can not see graphic user interface and can not operate.

【

POWER

】

lamp is off, please do as following:

Step1: Connect AC cable correctly;
Step2: Switch on the power button on the real panel.

【

POWER

】

lamp is in red, just press

【

POWER

】

button to start DVR.

When DVR is started,

【

POWER

】

lamp is in green. On the monitor or VGA display, DSP and

HDD initialization process will be shown.

The first line represents DSP initialization. If the DSP icon is “

”, it means that the DSP is

initialized error, please contact administrator at once.

The second line represents HDD initialization. Icons of IDE1 master and slaver HDDs, IDE2

master and slaver HDDs, etc are displayed. If the HDD icon is “

”, it means the corresponding

HDD is not installed or not detected. If HDD is not detected, please contact administrator.

Note: If HDD is not installed or not detected, DVR can beep for alarm. You can enable the

alarm option in “Exceptions” menu.

Summary of Contents for ATX H-264










































































































Search results

Summary of Contents for ATX H-264

Reviews:

Brands by name

Popular brands

Adata ATX H-264, User Manual

Search results

Summary of Contents for ATX H-264

Reviews:

Brands by name

Popular brands