Adata ATX H-264 User Manual Download Page 6

Page: 6 / 108

User Manual of AData ATX H.264 DVR

AData Ltd.

Page

108

Support FAT32 file system.

Support HDD SMART technology.

Support cycle or none cycle record.

Support recorded files and clips backup. Support USB memory and IDE CD-R/W.

Preview and playback

Support analog moniotor and VGA output.

Support multiple preview modes.

Support sensitive area mask.

Support camera spiteful block alarm.

Support 1-ch playback. Support play forward, backward, pause, frame by frame, etc.

Support play back by files or by time.

Display local record status.

PTZ

Support many kinds of PTZ protocol.

Support preset, sequence and cruise.

Alarms

Support exception alarm, motion detection alarm, external alarm, etc.

Others

Support IR control.

Support multi-level user management.

Network

Support TCP, UDP, RTP, and Multicast for network preview.

Support PPPoE for board band dialup.

Support remote parameters setup.

Alarm information can be sent to remote center.

Network control PTZ.

Network record the real time stream.

Network download and playback the recorded files in DVR.

Remote upgrade the firmware.

Support IE to preview and config DVR.

Support log.

Summary of Contents for ATX H-264










































































































Search results

Summary of Contents for ATX H-264

Reviews:

Brands by name

Popular brands

Adata ATX H-264, User Manual

Search results

Summary of Contents for ATX H-264

Reviews:

Brands by name

Popular brands