Adaptec ARO-1130CA, Installation And Hardware Manual, Page: 59 / 78

A-7
Troubleshooting
12
Select cda1000 on the left part of the screen. Click the right
mouse button on Tag Value on the right part of the screen and
select Modify from the popup menu.
13
Type the tag value of the aic78xx miniport driver in the space
provided and click OK.
14
Select aic78xx on the left part of the screen. Click the right
mouse button on Tag Value on the right part of the screen and
select Modify from the popup menu.
15
Type the tag value of the cda1000 miniport driver in the space
provided and click OK. You have now reversed the tag values
for the two miniport drivers, and the cda1000 driver will load
first.
16
Exit from the Registry Editor and from Windows NT. Then
shut down the computer system.
17
Physically install the ARO-1130CA in the PCI/RAIDport
expansion slot.
18
Attach your boot drive to one of the SCSI channels controlled
by the ARO-1130CA and boot the computer system.
Scenario #2: Adding an AHA-2940 Family Adapter to a
RAIDport II System with an ARO-1130CA
These instructions assume that Windows NT is already installed on
the computer system and that the boot drive is connected to the
SCSI channel controlled by the ARO-1130CA. If the AHA-2940 Fam-
ily adapter is already installed, shut down the computer system,
remove the adapter from the slot, and restart the system.
Installing the AHA-2940 Family Driver
1
Start the Windows NT Control Panel and double click the
SCSI Adapters
icon.
2
Click the Drivers tab and click Add.
3
Click Have Disk …, and insert the AIC-78xx Family Manager
Set diskette in the floppy disk drive. (This diskette was
included with your 2940 Family adapter.)