Adaptec ARO-1130CA, Installation And Hardware Manual, Page: 58 / 78

A-6
ARO-1130CA Installation and Hardware Guide
This table of hexidecimal numbers indicates the Tag-value
sequence in which the SCSI Miniport drivers are loaded when
you start Windows NT.
9
Determine what the Tag value loading sequence is. Here is
how you do this:
a
Ignore the four-digit groups on the left of each row.
b
Going from left to right, and starting on the first row,
divide the two-digit numbers into groups of eight. In this
example, the groups are
02 00 00 00
03 00 00 00
01 00 00 00
01 01 00 00
etc.
You need to write down all the number groups from all
rows in the table.
c
In each group of eight numbers, reverse the sequence of the
two-digit pairs, like this:
00 00 00 02
00 00 00 03
00 00 00 01
00 00 01 01
etc.
d
Write down the series of resulting numbers, without all the
extra zeroes. In this example, it is 2, 3, 1, 101, etc. This is the
Tag value loading sequence for SCSI Miniport drivers. In
other words, when Windows NT loads these miniport
drivers, the one with Tag value 2 is loaded first, then the
one with Tag value 3, and so on.
10
Compare the Tag value loading sequence to the actual tag val-
ues of cda1000 and aic78xx that you determined in steps 4
and 5. If cda1000 is loading before aic78xx, skip to step 16. If
aic78xx is loading first, continue with the next step.
11
Expand the tree on the left until you can see the nodes under
\HKEY_LOCAL_MACHINE\System\CurrentCon-
trolSet\Services.