Adaptec ARO-1130CA, Installation And Hardware Manual, Page: 54 / 78

A-2
ARO-1130CA Installation and Hardware Guide
Problems Running the Software On Your
Windows NT Workstation
If the Adaptec CI/O Workstation Array Management Software does
not start when you double-click the program icon and you see a
warning box with
Unable to Initialize IOMAPI
, try the following:
■
Verify that the following NT service has a status of Started
(double-click the Services icon in Control Panel). If it does not,
select the service and press the Start button:
CIO Array Management Service
■
Make sure you have the proper security access rights to the
Windows NT services. The Windows NT services can be
started, stopped, paused, etc., according to the NT service
security rules defined by Microsoft (refer to the Windows NT
documentation for more details).
■
Verify that the Registry was updated correctly during installa-
tion. If the values do not match the values listed below, try
reinstalling the Adaptec CI/O Workstation Array Manage-
ment Software:
– The correct entries for HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\Services\
CIOArrayManagement
are:
DisplayName: REG_SZ: CIO Array Management
Service (v x.xx)
ErrorControl: REG_DWORD: 0x01
ImagePath: REG_SZ: [Pathname specified during
installation]iomgr.exe
ObjectName: REG_SZ: LocalSystem
Start: REG_DWORD: 0x02
Type: REG_DWORD: 0x110
SharedMemName: REG_SZ: iomgr.shm
– The correct entries for HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\Services\EventLog\System\
CIOArrayManagement
are:
EventMessageFile: REG_SZ: [pathname to system32
directory]\system32\iomgrmsg.dll
TypesSupported: REG_DWORD: 0x7