5-9
Installing Software on a Novell NetWare Server
Installing the Adaptec CI/O Management
Software for Novell NetWare
The Adaptec CI/O Management Software for Novell NetWare does
not support NetWare installations from CD-ROM peripherals
mounted as a NetWare volume. Additionally, the Adaptec CI/O
Management Software for Novell NetWare only supports installa-
tions from CD-ROM DOS drive x:, where x is the CD_ROM drive
letter. (For information on using a CD-ROM drive on a NetWare server,
see Appendix C, Using a CD-ROM Drive.)
Note:
Before you start the Adaptec CI/O Management Soft-
ware, be sure that communication with the server via the
network is already established. (See the documentation pro-
vided with your TCP/IP software for instructions on estab-
lishing communications, and also Hints for Establishing
Communications With Your Server on page 6-3.)
Follow these steps to install the Adaptec CI/O Management Soft-
ware for Novell NetWare:
1
Insert the Adaptec CI/O Management Software CD-ROM in
your CD-ROM drive.
2
The CD-ROM drive must be added to the search path. From
the NetWare colon prompt (:), type the following and press
Enter
:
search add
x
:\netware\disk2
where
x
is the CD-ROM drive letter.
3
From the NetWare colon prompt (:), type the following and
press Enter:
load
x
:\netware\disk2\nwsetup
where
x
is the CD-ROM drive letter.
