5-3
Installing Software on a Novell NetWare Server
7
When prompted to save the current version of
aspitran.dsk
,
select Yes or No.
8
When prompted to save the current version of
nwpaload.nlm
,
select Yes or No.
9
When the message
File “A:\netware\v4_1x\nwpaload.nlm was
not found…”
appears, ignore the message and press Enter to
continue.
10
Select Continue copying the next file.
11
Select Yes to install an additional disk driver.
12
Select
aspicd.dsk
and press Enter.
13
When prompted to so save current version of
aspicd.dsk
, select
No
.
14
When prompted to so save current version of
aspicd.ddi
, select
No
.
15
Select No when prompted to install an additional disk driver.
16
Select Continue Installation.
17
Press Enter to continue.
18
Down and exit the server. At the DOS prompt, copy the
nwpa.nlm
,
nbi.nlm
, and
nwpaload.nlm
files (located on the
Novell Installation CD-ROM) to the server’s startup directory
(usually
c:\nwserver
).
Note:
To load the driver automatically at server bootup,
make sure the
startup.ncf
file includes the
load
command
line for the
cda1000.dsk
driver. (If you also have an
Adaptec host adapter that uses the Adaptec
aic78xx.dsk
driver, make sure the driver loads after the
cda1000.dsk
driver.)
