5-4
AAA-130SA Series Installation and Hardware Guide
Note:
Older versions of the
aic78xx.dsk
driver (before v1.30)
are compatible with
cda1000.dsk
as long as the AAA-13xSA
RAID card’s PCI slot is not specified on the command line
(e.g.,
load aic7870.dsk slot=
z
). If there is an AIC-78xx based
card (e.g., AHA-2940) in the system,
z
must point to that
card’s slot number and not to the AAA-13xSA RAID card’s
slot number. If loaded without command line parameters,
NetWare list valid slot numbers. The AAA-13xSA RAID
card will be listed in the parameter list; however, do not
select it.
NetWare 3.12
Follow these instruction only if you are installing NetWare 3.12 for
the first time:
1
Follow the procedures in your NetWare documentation for
installing a new server. (For information on using a CD-ROM
drive on a NetWare server, see Appendix C, Using a CD-ROM
Drive.)
2
When you see the NetWare colon prompt (:), use the
load
com-
mand to install the driver from the Adaptec Array1000SA
Family Manager Set driver diskette.
The correct syntax to load the
cda1000.dsk
driver is
:load [
pathname
]cda1000
(For example,
:load a:\netware\v3_1x\cda1000
)
