5-2
AAA-130SA Series Installation and Hardware Guide
Installing the Array1000SA Driver for Novell
NetWare
This section explains how to install the Adaptec Array1000SA driver
(
cda1000.dsk
) for NetWare. To begin driver installation, see either
Installing the Driver When Installing NetWare below, or Installing the
Driver When NetWare is Already Installed on page 5-6.
Note:
We recommend that you install your Novell NetWare
operating system on an array to take advantage of the
redundancy and performance features of the array.
Installing the Driver When Installing NetWare
To install the
cda1000.dsk
driver when you are installing NetWare,
follow the instructions below for the version of NetWare you are
installing.
NetWare 4.11
Follow these instructions only if you are installing NetWare 4.11 for
the first time:
1
Follow the procedures in your NetWare documentation for
installing a new server. (For information on using a CD-ROM
drive on a NetWare server, see Appendix C, Using a CD-ROM
Drive in this installation guide.)
2
When a screen appears that asks you to select a disk driver,
press Enter.
3
Press Insert to install an unlisted driver.
4
Insert the appropriate Adaptec Array1000SA Family Manager
Set driver diskette (Disk A or Disk B) into your floppy disk
drive.
5
Press F3 and specify the path to the
cda1000.dsk
driver. For
NetWare 4.1, the driver is located in
\netware\v4_1x
on the
diskette.
6
Select
cda1000.dsk
and press Enter.
