5-1
5
▼ ▼ ▼ ▼
Installing Software on a
Novell NetWare Server
This chapter explains how to install the software required to use the
AAA-13xSA RAID card in a Novell NetWare (NetWare 3.12 and
4.11) server.
Before installing the software, make sure the AAA-13xSA RAID card
is already installed. If you plan to boot from an array, make sure the
array is already created. To install all of the software, you must com-
plete the following in the order presented:
■
Install the
cda1000.dsk
driver for Novell NetWare
■
Install the TIRPC Communications Module
■
Install the Adaptec CI/O Management Software for Novell
NetWare
Once all software is installed, refer to the Adaptec CI/O Management
Software User’s Guide for instructions on adding, deleting, and man-
aging your arrays from the server console.
Note:
If your server has an additional Adaptec AIC
™
-78xx
device (for example, AHA
®
-2940 or AHA-3940 host
adapter) installed, the NetWare driver for these adapters
must be from the Adaptec 7800 Family Manager Set 2.10 or
higher. Ultra2 SCSI host adapters require v3.01 or higher of
the Family Manager Set.
