XL-SEAT
2005-2011 DODGE DAKOTA QUAD CAB PASSENGER
p. 4
7-
Install the
XL-SEAT
onto the floor adaptor. Secure the bottom of the
XL-SEAT
in place
using a 3/8”
x 3/4” bolt. (
Picture 1) Attach the top of the
XL-SEAT
to the adaptor #
XLS-DKTAQ05R-03
using two (2) 5/16”
x 3/4
” bolts. (
Picture 2) Now tighten
the 3/8”
x
3/4
” bolt from step six (6). Secure the motor to the floor adaptor using 1 1/
4
”
x 1/2
”
shoulder bolt. Install the safety guard over the motor using a self-tapping screw.
8-
Install the electrical wiring for the
XL-SEAT
. Follow the instructions found in the
attached document entitled:
ELECTRICAL INSTALLATION FOR XL-SEAT.
9-
Install the
XL-SEAT
transfer board. NOTE: The
XL-SEAT
transfer board has adjustment if
needed. Lift off the cushion. Unbolt the four (4) flat head bolts and relocate the
board to the desired position and secure it in place using the four. Once you have
completed reinstall the cushion.
