XL-SEAT
2005-2011 DODGE DAKOTA QUAD CAB PASSENGER
p. 3
4-
Remove the lumbar support wheel. NOTE: The lumbar support will no longer be
adjustable. Unclip the wheel and cut the shaft flush with the seat.
5-
Unbolt the two bolts that hold the rear of the driver’s seat. Install the floor adaptor #
XLS-DKTAQ97R-01
. Install the adaptor
over
the seats legs. Position and secure the
floor adaptor in place using the seats original bolts.
6-
Temporarily install adaptor #
XLS-DKTAQ05R-03
onto the adaptor #
XLS-DKTAQ05S-02
using a 3/8”
x 3/4
” bolt. (NOTE: Do not tighten the bolt yet.)