Adam AGF 600aM, Manual

Page: 18 / 32

©Adam Equipment Co. 2019
15
show “LOAD” , otherwise the scale will continue to run the function and the display
will show “UNLOAD” , and the function will continue to repeat the measurements
and print outs until all the animals or items have been removed. The user can
stop/restart the function at any time by pressing the
[  0  /Esc] key.

The scale will remain in the animal weighing mode until a new mode is selected
using the [Func/ Set] key and [Tare/
↵
] key to enter.
6.12 HOLD/ PEAK FUNCTION

Press [Func/Set] and scroll through the list of functions using the
⭡
and
⭣
directional keys.

Press [Tare/
↵
] to enter ‘Hold’ or ‘Peak’ mode. Hold will allow the user to
weigh an object and hold the value, whilst the Peak function will allow you to
complete multiple weighings and record the peak value.

Place the object to be weighed onto the weighing platform, “hold” will
appear in the top-right corner of the display.

Once the weight has stabilised, the weight value will remain on the display
until either more weight is added onto the weighing pan or the weighing
mode is changed.

If using the “Peak” mode, the recorded “Peak” can be held for set interval,
and after that the “Peak” will be deleted automatically if a higher “Peak”
hasn’t been recorded, the “Peak” release time can be set by pressing the
[Unit/ Mode] key and using the directional keys
⭡
and
⭣
to set the “Peak”
delete time interval in seconds, or to turn this off [del 2s – del 10s, or OFF].

If the “Peak” release is set to OFF, the [  0  /Esc] key can be used to clear
the “Peak”, and restart the function.
7.0 USER PARAMETERS
Pressing the [Func/Set] key and holding for 2 seconds during normal operation allows the
user to access the parameters for customising the scale. The parameters are split into 2
groups:
1. Scale parameters (pressing the [Func/Set] key will access this
automatically).
2. RS-232 parameters (can be accessed by selecting the ‘rs 1’ and ‘rs 2’ menu
options in the scale parameters menu).