©Adam Equipment Co. 2019
12
Remove the sample weight. Then any other weight placed on the scale will
be displayed as a percentage of the original sample. For example, if 3500g
is placed on the scale and percent weighing is selected, the display will show
100.0%. Remove the 3500g weight and place a 3000g weight. The display
will show 85.7% as 3000g is 85.7% of 3500g.
The number of decimal points will depend on the weight used in comparison
to the capacity of the system. A smaller weight will show only “100%” while a
larger weight might show “100.00%”.
If the scale was showing zero weight when entering this function, then the
user must manually enter the weight to be set as 100% as described below.
Make reference weight of 100% on platform.
Press the
[Disp/Mode]
key. Display will show 100%.
The weight entered must be greater than 50 scale divisions.
Press the
[Func/Set]
key to select a new weighing mode.
NOTE:
The display may jump by large numbers unexpectedly if small weights are used to set as
100% reference. The scale checks if the weight is too small and will show Error 7.
6.10 ANIMAL
(D
YNAMIC
)
WEIGHING
The scale can be set to animal (dynamic) weighing for weighing any items that are
unstable or may move.
The scale will use a special filter to minimise the effects of any movement while the
moving animal or unstable samples are on the scale.
Press
[Func/Set]
and scroll through the list of functions using the
⭡
and
⭣
directional keys
Press
[Tare/
↵
]
to enter animal weighing. The display will show
“LOAD”
and the
Animal/Dynamic weighing symbol
The scale is now ready to weigh an
unstable animal or sample on a weighing scale platform.
