ENGLISH (translation of original instructions)
8 - MAINTENANCE
Maintenance includes inspections, checks and interventions which, to prevent interruptions and
breakdowns, systematically keep the machine lubrication status and the parts subject to wear under
control. These operations, although simple, must be carried out by Qualified Personnel.
The machine is designed to minimise routine maintenance. It is the operator’s responsibility to assess the
status and its suitability for use. We recommend stopping the operations and performing maintenance
every time operation is not perfect. This will always allow maximum efficiency.
MAINTENANCE
FREQUENCY MACHINE STATUS
SYMBOL
Make sure the pipes and couplings
are properly connected
Every month
Isolation for Maintenance purposes
Check/clean pipes and fittings
Every 12
months
Isolation for Maintenance purposes
Check/clean filter and fittings
Every month
Isolation for Maintenance purposes
Check/clean pump body
Every month
Isolation for Maintenance purposes
9 - DEMOLITION AND DISPOSAL
If the electric pump is to be scrapped, its parts are to be given to companies specialised in disposing of
and recycling industrial waste, as shown on the table below:
Parts to be disposed of
Disposal method
PACKAGING
The packaging consists of biodegradable cardboard which can be sent to companies for normal
pulp recycling.
METAL PARTS
The metal parts, whether painted or stainless steel, are usually recycled by companies specialised
in the scrap metal industry.
ELECTRICAL AND
ELECTRONIC
COMPONENTS
These must be disposed of by companies specialised in disposing of electronic components, in
compliance with the requirements of Directive 2002/96/EC (see Directive text below).
PARTS OF A DIF-
FERENT NATURE
Other parts of the system in which the electric pump is installed, such as pipes, rubber gaskets,
plastic parts and wiring, are to be given to companies specialised in disposing of industrial waste.
APPLICABLE REG-
ULATIONS FOR
CUSTOMERS
IN THE
EUROPEAN
UNION
The European Directive 2002/96/EC states that the equipment bearing this symbol on the product
and/or on the packaging is not to be disposed of with unsorted municipal waste. The symbol indi
-
cates that this product must not be disposed of with normal household waste. It is the responsibility
of the owner to dispose of these products and the other electrical and electronic equipment through
specific collection facilities appointed by the government or by local authorities.
CAUTION! Make sure the pump is disconnected from the power supply and is not
in operation before carrying out any maintenance.
Always use the appropriate PPE (Personal Protective Equipment):
WARNING!
Failure to comply with these requirements will release the
manufacturer from any liability resulting from the effects of the Warranty.
Safety footwear
Protective clothing
Protective gloves
Safety goggles
