Adam Equipment CCT, Manual

Page: 18 / 23

© Adam Equipment Company 2020
9.10 Auto/ zero tracking
The auto-zero function calculates the limits at which the scale can be brought back to zero.
To enter this parameter, press the [Tare]
↵
key when “Auto” is shown.
Use the numeric [1] or [6] keys to alternate between the options and press [Tare]
↵
to select.
Note: Trade approved machines require this to be set in accordance with specific
rules.
9.11 Capacity
This parameter allows you to set the weighing capacity limit.
To enter this parameter, press the [Tare]
↵
key when “Capa” is shown.
Use the numeric [1] or [6] keys to alternate between the options and press [Tare]
↵
to select.
9.12 Count Unit
This parameter allows you to set the weighing/ counting unit.
To enter this parameter, press the [Tare] ↵ key when “C-Unit” is shown.
Use the numeric [1] or [6] keys to alternate between the options and press [Tare]
↵
to select.
9.13 Dual
The dual parameter concerns the scale’s dual weighing interval and range settings.
To enter this parameter, press the [Tare]
↵
key when “Dual” is shown.
Use the numeric [1] or [6] keys to alternate between the options and press [Tare]
↵
to select.
9.14 Linear calibration
For information about the linear calibration procedure, please see section 7 .