Adam Equipment CCT, Manual

Page: 13 / 23

© Adam Equipment Company 2020
6.0 Replacing the display
To replace the display, ensure that you have switched off the power, then follow these steps:

Remove the scale’s exterior casing

Disconnect all exterior wires and power cables leading to the PCB display.

Lift the display from the 4 pegs located in the corners of the display

Once detached, attach the new display to the pegs then connect the previously
detached wires to the new display unit. Screw in to secure.
7.0 Replacing the PCB
To replace the PCB, ensure that you have switched off the power, then follow these steps:

Unscrew the plastic cover for the charging board and USB components located
beneath the scale

Remove the USB and charging component
Pegs