Adam Equipment CCT, Manual

Page: 16 / 23

© Adam Equipment Company 2020
The display will show the first parameter “ADCnt” . To scroll through other parameters press
the numeric keys [1] or [6] and the [Tare]
↵
key to confirm.
9.1 A/D COUNT
To enter this parameter, press the [Tare]
↵
key when “ADCnt” is shown.
This parameter allows you to view the A/D counts from the internal A/D converter. This can
be an aid to service.
Press the [Tare]
↵
key to return to the PARAMETER menu.
9.2 Reset
To enter this parameter, press the [Tare]
↵
key when “Reset” is shown.
This parameter allows you to reset count values.
Press the [Tare]
↵
key to return to the PARAMETER menu.
9.3 C-Con
This setting will allow the user to see how many times the machine has been calibrated.
(Calibration control)
To enter this parameter, press the [Tare]
↵
key when “C-Con” is shown.
Use the numeric [1] or [6] keys to alternate between “cont” and “Jumpr” options and [Tare]
↵
to select.
Selecting the “Jumpr” option will lock the scale.
Note: Trade approved machines require this to be set in accordance with specific
rules.
9.4 Dot
This option will allow you to set a comma or dot on your weighing screen.
To enter this parameter, press the [Tare]
↵
key when “C-Con” is shown.
Use the numeric [1] or [6] keys to alternate between “dot” and “comma” options and [Tare]
↵
to select.
9.5 M-Tare
This option allows you to set the tare limit.