background image

 

© Adam Equipment Company 2017 

 

 

 

 

19  of  22 

 

WARRANTY STATEMENT 

Adam  Equipment  offers  Limited  Warranty  (Parts  and  Labour)  for  any  components  that  fail 
due to defects in materials or workmanship. Warranty starts from the date of delivery. 
 
During the warranty period, should any repairs be necessary, the purchaser must inform its 
supplier  or  Adam  Equipment  Company.  The  company  or  its  authorised  Technician  reserves 
the right to repair or replace the components at any of its workshops at no additional cost, 
depending  on  the  severity  of  the  problems.  However,  any  freight  involved  in  sending  the 
faulty units or parts to the Service Centre should be borne by the purchaser. 
 
The warranty will cease to operate if the equipment is not returned in the original packaging 
and  with  correct  documentation  for  a  claim  to  be  processed.  All  claims  are  at  the  sole 
discretion of Adam Equipment. 
 
This  warranty  does  not  cover  equipment  where  defects  or  poor  performance  is  due  to 
misuse, accidental damage, exposure to radioactive or corrosive materials, negligence, faulty 
installation,  unauthorised  modifications  or  attempted  repair,  or  failure  to  observe  the 
requirements and recommendations as given in this User Manual. 
 
This  product  may  include  a  rechargeable  battery  that  is  designed  to  be  removed  and 
replaced by the user. Adam Equipment warrants that it will provide a replacement battery if 
the battery manifests a defect in materials or workmanship during the initial period of use of 
the product in which the battery is installed. 
 
 As  with  all  batteries,  the  maximum  capacity  of  any  battery  included  in  the  product  will 
decrease  with  time  or  use,  and  battery  cycle  life  will  vary  depending  on  product  model, 
configuration,  features,  use,  and  power  management  settings.  A  decrease  in  maximum 
battery capacity or battery cycle life is not a defect in materials or workmanship, and is not 
covered by this Limited Warranty. 
        
Repairs  carried  out  under  the  warranty  do  not  extend  the  warranty  period.  Components 
removed during warranty repairs become company property. 
        
The  statutory  rights  of  the  purchaser  are  not  affected  by  this  warranty.  The  terms  of  this 
warranty is governed by the UK law. For complete details on Warranty Information, see the 
terms and conditions of sale available on our web-site. 

Summary of Contents for AZextra 30P

























Reviews: