© Adam Equipment Company 2017
12 of 22
3.8 AUTO SLEEP FUNCTION
This function may be enabled or disabled by the user. If enabled, when the
scale is not used for some time (as pre-set by the user under this function) it
automatically switches off. To set this parameter-
•
During self-checking, press [Zero] and release at once. The
display shows “
SLEEP nodE
”.
•
Press [Print] key to scroll through the auto sleep values.
“
0
” Auto sleep mode disabled
“
1
” Auto sleep after 1 minute
“
5
” Auto sleep after 5 minutes
“
10
” Auto sleep after 10 minutes
•
Press [Tare] to set the value. The scale returns to zero.
3.9 BACKLIGHT OPERATION
The backlight may be enabled or disabled by the user. If the backlight is
disabled the battery life will be maximised. With the backlight in operation the
battery life will be less depending on the extent at which the scale is used.
To set the backlight
•
Press and hold the [Auto Clear] key for 4 seconds.
•
Press the [Print] key to change the operation:
“
EL
” “
AU
”
Automatic control of the backlight
“
EL
” “
on
”
Backlight on full time
“
EL
” “
oFF
”
Backlight turned off
•
Press [Tare] to store the setting.
Backlight operation
When the backlight is set from automatic control-
•
It will only turn on when the scale is being used.
•
It will be on when a weight is on the platform or when a key is
pressed.
•
It will turn off automatically after a few seconds when the weight is
zero or after a while, the last key was pressed.
