Ada ROTARY 400 HV, Manual

Page: 20 / 36

1. Sound On/Off
2. ON/OFF power
3. Line over the Zero level Indicator
4. LED indicator - Zero level
5. Line below the Zero level Indicator
6. LCD display
7. Detector sensor
8. Backlight On/Off
9. Accuracy selec�on bu�on
10. Accuracy icon
11. On/Off backlight symbol
12. On/Off sound symbol
13. Power indicator
USING THE LASER DETECTOR
Press the On/Off bu�on (№ 3 pic.5) to turn on the detector.
Select the measurement accuracy (№ 1 pic.5). Selected mode will be shown
on the display: accurate mode ±1mm (№7 pic.5), rough mode ±2 mm
( № 8 pic.5). Select the mute or sound mode ( №2 pic.5). The sound symbol
( №12 pic.5) wil be shown on the display. Turn the detector sensor (№ 5 pic.5)
towards the laser beam and move the detector up and down following the
direc�on of the arrow on the LCD. Move down the laser detector if the arrow
points down ( №9 pic.5). You will hear a sound alarm. Move up the laser
detector if the arrow points up ( № 11 pic.5). You will hear a sound alarm.
When laser beam is in the middle of the sensor, you will hear a con�nuous
sound alarm and mid market will appear on the display (№ 10 pic.5).
The level marks on the sides of the laser detector correspond to the mid
pos��on of the laser beam on the detector sensor. Use them to make marks
on the surfaces to be marked or to take readings from the staff.
CARE AND CLEANING
• Store in a clean dry place, between 5°F – 131°F (-15°C ... +55°C)
• Before moving or transpor�ng the unit, ensure that it is turned off.
• If the instrument is wet, dry off with a dry cloth. Do not seal the laser in
the carrying case un�l completely dry.
• Do not a�empt to dry the instrument with fire or with an electric dryer.
• Do not drop the instrument, avoid rough treatment, and avoid con stant
CALIBRATION
Laser level is calibrated on the factory. Check the calibra�on any �me when
you drop the tool or mishandle it.
20