Ada ROTARY 400 HV, Manual, Page: 21 / 36

⑥
HORIZONTAL PLANE CALIBRATION TEST
1. Set up the tool approximately 150� (50m) from a wall or a measuring staff.
2. Level the instrument as accurately as possible.
3. Posi�on it so that the X-axis is poin�ng in the direc�on of the measuring
staff or wall.
4. Turn on the tool.
5. Mark the height of the laser beam on the measuring staff or make a
mark on the wall.
6. Rotate the instrument by 180°.
7. Mark the height of the laser beam on the measuring staff or make a
new mark on the wall. The difference between the heights or marks
should not exceed 15 mm.
8. Repeat this procedure for the Y axis.
VIBRATION
• Periodically check the calibra�on of the instrument.
• Clean with a so� cloth, slightly dampened with a soap and water solu�on.
Do not use harsh chemicals, cleaning solvents or strong detergents.
• Keep the laser aperture clean by wiping it gently with a so� lin�ree cloth.
• Keep the detec�on window of the Laser Detector clean by wiping it with a
so� cloth moistened with glass cleaner.
• Remove ba�eries from the instrument during lengthy periods of non-use,
and store in carrying case.
• Ensure that the instrument is turned off before removing ba�eries.
WARRANTY
This product is warranted by the manufacturer to the original purchaser to
be free from defects in material and workmanship under normal use for a
period of two (2) years from the date of purchase.
During the warranty period, and upon proof of purchase, the product will
be repaired or replaced (with the same or similar model at manufactures
op�on), without charge for either parts of labour.
In case of a defect please contact the dealer where you originally
purchased this product. The warranty will not apply to this product
if it has been misused, abused or altered. Withiut limi�ng the
foregoing, leakage of the ba�ery, bending or dropping the unit are
presumed to be defects resul�ng from misuse or abuse.
English
21