Ada Platinum Elite, Installation Manual

Page: 38 / 48

SYSTEM SET UP SYSTEM SET UP
INSTALLATION MANUAL 36 37
For Advanced Installations (refer
AC brand Commissioning Notes),
the Temperature Reference
Sensor can be changed from the
Settings screen - this is the
Temperature Sensor that is
controlling the setpoint of the AC
system. If the system has been
setup to allow use of an external
Temperature Reference Sensor,
this setting will normally be the
Tablet. This can be changed to
any Zone linked to a Temperature
Sensor. Tap the Temperature
Reference Sensor box. It will
require the 4-digit installer code
to access the Temperature
Reference screen.
A zone used as the Temperature
Reference will be highlighted on
the Zones screen with an
icon. ‘X’
23. Adding a Zone
24. Adding a Sensor
To add a Zone to the system, once
the new Zone Damper has been
installed, access the Zone setup
screen and tap the ‘Recheck’ icon
- the new Zone should appear in
the list on the left and can then be
setup using this screen.
NOTE: The same process can be
used to remove a Zone. Any
unplugged Zone or a Zone in fault
when a ‘Recheck’ is activated will
be removed from the system.
If upgrading a system to use
Wireless Temperature Sensors,
access the Zone setup screen and
tap ‘Add’ for the desired Zone.
Follow the process described in
Section 17.
7
Close