Ada Platinum Elite, Installation Manual

Page: 19 / 48

AC CONTROL - MITSUBISHI ELECTRIC
INSTALLATION MANUAL 16 17
13. AC Control - Mitsubishi Electric
Wiring Diagram
Cable with plugs,
supplied with Gateway
Tablet
Cat6 cable 24VDC
Power
Supply
AC Indoor Unit PCB
Platinum Elite
Gateway
PEGM
SW1
SW3 SW4
SW1
3 or 4
2
ON
ON
Fan Speed Setting
A+ B-
CN105
Commissioning Notes
Advanced Installation
Ÿ
Wire Platinum Elite Zone Control System, Gateway and AC Indoor Unit as shown ensuring
all wires are securely connected. Unless otherwise specified, leave DIP switches in their
default position.
Ÿ
Check the number of fan speeds available on the AC Indoor Unit and if necessary, modify
the SW1.4 switch as shown by the Fan Speed Setting on the Wiring Diagram page. The
default setting is 3 or 4.
Ÿ
Initialise the AC Unit with the Mitsubishi Electric AC Wall Controller connected.
Mitsubishi Electric
Ensure the
AC control temperature is set to be measured from the AC return air sensor.
Ÿ
Follow the Platinum Elite onscreen prompts to complete the AC setup.
The Platinum Elite system is capable of providing an external reference temperature to
compatible AC Units from either the temperature sensor in the Tablet or one of the
connected Temperature Sensors. Utilising this feature will potentially modify the control
loop for the AC Unit and as such requires precise configuration of the AC Unit, the Platinum
Elite Gateway and the Platinum Elite Tablet software to ensure the system functions
correctly.
For detailed information on AC Unit system compatibility utilising
external reference temperatures and related Advanced Installation options, please visit the
Platinum Elite Zone Control System website www.platinumzoning.com or contact your ADA
distributor.
Ÿ
AC Unit, Gateway and Platinum Elite Zone Control System can be powered up at the same
time, but if powered up separately, ensure AC Unit and Gateway are on before the
Platinum Elite Zone Control System.
2-core cable (PETCW)
supplied with Platinum
Elite Cable Kit
Down/OFF Up/ON
Wall Controller
SW1
ON
Default Gateway Setting
Down/OFF Up/ON