GENERAL INFORMATION
GENERAL INFORMATION
GENERAL INFORMATION
GENERAL INFORMATION ---- INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
O
O
O
Operatio
peratio
peratio
peration and storage requirements
n and storage requirements
n and storage requirements
n and storage requirements
The ambient temperature for operating the device is b5 and +50 degrees Celsius. Do not install the device
in the proximity of heat sources, such as heating pipes, heaters, furnaces or other devices, which radiate heat. It is not
necessary to provide air circulation to dissipate the heat. Mount the device in such a way that it is protected against
moisture. Trouble free operation is ensured up to 75% air humidity.To prevent fire or electric shock, never allow
liquids to enter the unit. The product must be stored in dry and well-ventilated rooms, without extreme temperature
fluctuations. Heat sources and aggressive active substances may not be stored in the proximity of the device. The
required storage temperature is 0°C - +60°C at an air humidity of 5 - 85% RH. The device must be stored in the
complete packaging, as delivered.
IIIInstallation
nstallation
nstallation
nstallation
Have this product installed by qualified staff only. Use the mounting systems which are specified or recommended by
ad notam. Install the product in a way that it is fixed properly and take care that children are not exposed to danger.
Please take extra care during installation, avoid impacts. Before cabling your monitor system, check that the power
7
is off. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets. Use of
power cords or adapters other than those provided may cause fire or malfunction. Place this product as close to the
power socket as possible. Leave enough space to insert and remove the power plug on demand. Even if you switch
off the product with your remote control, power is not cut off unless the power cord is unplugged.
installation environment
installation environment
installation environment
installation environment
Avoid direct light or sun exposure, direct proximity to heat sources, outdoor installation. The product is specifically
designed for indoor use only. There is the danger of fire and of electric shocks and damage to the device, if it is
operated outdoors. Do not place any heat sources such as radiators and heat registers, etc. near the monitor. To
reduce eye strain, avoid installing the monitor system against a bright background such as a window. Position the
monitor system at the height of your eye level and directly in front of you at a comfortable viewing distance.
