NOTE
NOTE
NOTE
NOTE
The power adapter should be adequately secured to prevent it from becoming unstable and/or falling. Make sure the
power source circuits are properly grounded. Use the supplied power cord in order to connect it to the power source. If your
installation requires a different power cord, be sure to use an officially approved power cord displaying the mark of the
safety agency that defines the regulations for power cords in your country. Please consider that the AC outlet for the
power adapter is placed within reach of the monitor system and should be easily accessible in case it needs to be
powered off.
Do install the product in a dry environment where the operating ambient temperature might not
not
not
not exceed 40°C /
104°F. Also don´t
don´t
don´t
don´t position the power adapter on top or on the back of the monitor system in order to prevent
thermal overload. Ensure that your installation complies with your national safety rules. Any servicing,
adjustment, maintenance or repair must be performed only by service-trained personnel.
Ensure that the power adapter is installed in a serviceable location, to access it easily in case of a defect. If you
choose to place the power adapter in a separate space, take care that the ventilation is present, because the power
adapters need convection cooling for stable working conditions.
When placing the power adapter in a fully enclosed space, make sure the air flow around the sides and top of the
power adapter is not restricted. According to a common rule of thumb the minimum dimensions for a niche for
the power adapter may be defined as follows: please calculate the length of the power adapter plus an additional gap
of at least 100mm all around for DC 12V power adapters and 200mm all around for DC 24V power adapters.