ACV Kompakt HRE eco 12 Solo, Installation Instructions Manual

Page: 20 / 56

ACV International 20
5.8 Balanced flue assemblies
Assembly general:
The assembly described below applies to all flue systems:
1. Slide the combustion gas flue pipe into the appliance flue outlet.
2. Slide the combustion gas flue pipes into each other.
Working from the appliance each pipe must be pushed into the previous pipe
3. Fit a non-vertical combustion gas flue pipe with a fall towards the appliance of minimal 5mm per metre
4. Fit flanged seams oriented upwards in a horizontal section.
5. Seal non-gastight connections with heat-and moisture-resistant aluminium tape.
Assemble all air supply pipes as indicates below:
1. Slide the air supply pipe into the appliance inlet.
2. Seal non-airtight connections with moisture-resistant tape.
3. Fit insulation if necessary.
Materials to be used:
Appliance
category
Materials Supplier
C13 Duct ACV
Other parts Gastec QA or ACV
C33 Duct ACV
Duct in the case of Prefab Gastec QA, ACV or third
parties
Other parts
C43 All materials Gastec QA or ACV
For the combined air supply /
combustion flue system Third parties
C53 Inlet grille ACV
Other parts and flue cowl Gastec QA or ACV
C63 All materials and duct CE approved flue material
C83 Inlet grille ACV
Main channel Third parties
Other parts Gastec QA or ACV