1.
Remove the Exterior Protective Coatings
Carefully remove all of the exterior protective coatings. Carefully remove the plastic wheel coverings and the exterior
Clear Guard protective coatings. See S/B 96-009,
Removal of Protective Coatings During TQI.
2.
Install the Fuses
To lower battery drain during vehicle shipping, the No. 15 BACK UP RADIO (10 A) and No. 16 BACK UP (10 A) fuses
are removed from the under-hood fuse/relay box and stored in the center pocket. Make sure you turn the power system
to OFF and wait at least
1 minute
before installing the fuses.
NOTE
The glove box is electrically actuated and will not open until these fuses are installed.
Page
4
of
15
