11.
Clean the Rear License Plate Area, and Install the Mounting Hardware
Remove the masking tape that covers the two bolt holes. Using 3M General Purpose Adhesive Cleaner (3M
#051135-08984) and a clean shop towel, carefully remove any tape residue. Then, install the two long bolts and two
self-tapping screws as shown.
Vehicle Exterior (Vehicle Lowered to Ground)
12.
Check the Tire Repair Kit
The tire repair kit is stored in the trunk. Check the expiration date in the upper left window. If the date is close, replace
the sealant.
Page
10
of
15
