Acura Juno T41 R, User Manual

Page: 54 / 55

ACURA Juno T41 User Guide 62
8 Using the UHF RFID scanner
l
Scan Timeout (in seconds ): Set the scanner to stop scanning within a set number of seconds.
Set this to 0 if you do not want the scanner to time out.
l
Refresh Rate : Set this to 0 (the default) to prevent duplicate tags from being reported. If you
want duplicate tags to be reported, set this to a value from 1‐10, depending on the number of
times per seconds you want the scanner to read and report the duplicate tags.
l
Tag Population Size : This setting gives the scanner an indication of the number of tags it is
likely to read in a session. The scanner is then optimized for the selected population size. The
default is Small (less than 100 tags).
l
Tag filtering :
l
Filter Mask : If required, you can set a filter mask so that only tags that match the filter are
scanned.
l
Filter Memory Bank : If you set a Filter Mask , you can select to check it against a specific
part of the tag (that is, a specific memory bank). The default is EPC.
l
Tag Mask Address : If you set a Filter Mask , you can specify where in the tag data the
scanner starts to filter. Set to 0 (the default) if you do not want to specify a tag mask
address.
l
Select Non‐matching tasks : If this option is selected, tags that DO NOT match the filter are
reported. If this option is not selected, tags that match the filter are reported.
Tag Data Options
l
Include Tag Memory : Select to include the tag memory.
l
Memory Bank to Read : If you selected to include the tag memory, choose which memory bank
to read it to (EPC, TID, or User)
l
Include Timestamp Stats : Select if you want to include the timestamp when a tag is read.
l
Include RSSI Stats : Select if you want to include the RSSI (Received Signal Strength Indicator)
when a tag is read.
Hardware Trigger
For apps that are not RFID‐aware, you can enable a button on the handheld and a keyboard wedge
to read tags into programs such as Microsoft Excel® or Word. ACURA recommends that you only
use this method to read tags if you do not have a suitable API.
l
Trigger Mode : Select the required mode ( Hold , which is the default and recommended option,
or Toggle ) for the hardware button assigned as the RFID tag scanner.
l
Scanner Hardware Button : Select the Action button or the Search button (or both) as the
RFID tag scanner button.
l
Keyboard Wedge : If selected, the scanned RFID tags will be sent to the program (for example,
Excel) that you are using to record the RFID data.