Navigation System
83
System Set-up
Volume
The navigation voice volume can be
adjusted by:
• Using the voice control system and
saying “Volume up” or “Volume
down.”
• Selecting
Volume
and changing the
setting by rotating the
Interface
Dial knob
.
• Saying “Volume Off,” or selecting
Volume
and then
OFF
.
NOTE:
If you turn the volume off, you will not
hear route guidance or voice command
confirmations.
Interface Dial Feedback
This setting allows you to control when
(and if) the system will read the current
selection you choose with the
Interface
Dial
. The purpose of this feature is to
minimize the need to look at the screen
while operating the dial. You can set the
one of three settings explained in the
following table. The factory default
setting is
AUTO
.
Guidance Prompts
While you drive to your destination, the
system displays and announces
guidance prompts for your next
maneuver. This setting allows you to
adjust the number of guidance prompts
before each maneuver. The settings
MIN
,
NORMAL
, and
MAX
are
described below. The factory default is
NORMAL
, so you can adequately
prepare for the next maneuver. If you
wish to change the number of guidance
prompts, select your preferred setting,
as shown in the following table.
* Uses street name in guidance phrase.
NOTE:
To temporarily turn off voice guidance
prompts, select
OFF
for the
Volume
setting in Set up.
Setting
Degree of assistance
ON
When selection is made,
the system always reads
what is selected.
AUTO
(factory default)
The system reads
selection only when
moving.
OFF
No voice assistance when
selecting.
Setting
Distance before maneuver
About
1/2
mile
About
1/4
mile
Just
before
maneuver
MIN
Yes
NORMAL
(factory default)
Yes
Yes
MAX
Yes*
Yes*
Yes
2008 RDX
