Navigation System
101
System Set-up
After you have traveled approximately
1/2 mile away from a mapped road, the
system will display a series of white
dots on the
map
screen to show the path
you have traveled. This is provided so
you can follow the dots to backtrack to
the mapped road you originally left.
Tracking continues until you reach a
mapped road. See
Off-road Tracking
on
page
66
Tracking is shown only in the 1/20, 1/8,
1/4, and 1/2 mile or the 80, 200, 400,
and 800 meter scales. Rotate the
Interface Dial knob
to change the
scales if necessary.
NOTE:
To clear existing dots, turn this feature
off and exit Set up. To re-enable this
feature, return to Set up and turn it on
again.
Correct Vehicle Position
The system relies on satellites for
positioning information. Buildings,
tunnels, and other objects can block or
reflect these signals, requiring the
system to use “dead reckoning” to
determine your location and direction.
This can sometimes lead to small errors
in positioning, such as showing you on
an adjacent street.
NOTE:
Using this function to adjust vehicle
position is not recommended. When the
system acquires a GPS signal, it will
automatically place the vehicle in the
correct location.
If you choose to do this, follow these
steps:
1. Stop the vehicle.
2. Select
Correct Vehicle Position
,
and the system will display a map
adjustment screen.
3. Use the
Interface Dial
to move the
vehicle position arrowhead to the
correct location, and push in on the
Interface Dial
. The display will
change to:
2008 RDX
