Navigation System
51
NOTE:
• It may take several minutes (the
system displays an hour glass while it
is calculating) to show all route
methods, and it is not unusual for the
different methods to pick the same
route. Voice commands cannot be
used while the system is calculating.
• If the trip is greater than 100 miles,
then “Minimize Toll Roads” and
“Minimize Freeways” will be grayed
out. This is normal.
• Zoom IN/OUT to view route details
or traffic conditions is not available
on this screen. After you choose a
“route method,” you can then zoom
in or out on the
map
screen to view
your route in details.
Say or select
SUMMARY
to display the
distance and time to go for each route.
Based on the summary data, you can
change the routing method by rotating
the
Interface Dial knob
.
Once you confirm your selection, say
the number of the desired routing
method or push in on the
Interface
Dial
.
NOTE:
Distances and times show for each
method in the Summary are
approximate.
After calculating the route with the new
method, the system displays a map of
your current location. The calculated
route will be highlighted as a blue line,
and a voice prompt will tell you how to
proceed along the highlighted route.
Push in on the
Interface Dial
and
select
Voice
to have the guidance
repeated.
Driving to Your Destination
2008 RDX
