Navigation System
65
For instance, let’s assume that your real-
time traffic is not displayed on the map,
and you want to make sure that your
settings are correct. You would do the
following:
• First you would ensure that the
“Traffic” button on the
Icon bar
is
blue (See
Icon Bar
above).
• Second, you select
ICON OPTIONS
and verify that both traffic options are
also on (blue). This procedure is
explained below.
If you select
Traffic
from the
Select
category for icon settings
screen, the
traffic icon options are displayed:
In the example above, only
Traffic
Icons
is selected and will show up on
the map. To also see
Traffic Speeds
flow on the map, this would need to be
turned on by first selecting it and then
pushing in on the
Interface Dial
to
select it so it appears as below.
Exit, and save your settings by moving
the
Interface Dial
to the right
(
DONE
).
NOTE:
• When viewing the map screen, you
can turn some icons on using voice
control.
• “Traffic Speeds” and “Traffic Icons”
must be selected in the “Traffic”
choice of “Icon options” to enable
the traffic display on the
map
screen.
• You can use voice commands,
“Display (or hide) traffic icons,” or
“Display (or hide) traffic speeds.”
See page
144
.
Driving to Your Destination
2008 RDX
